JCB 416

JCB 416

Normale prijs $6.00
/
Inclusief belasting. Verzending Berekend bij het afrekenen.

Slechts 0 artikelen op voorraad!

Fits Britains Farm Master 416

Professional pre-cut, extra thin and waterproof stickers, ready for use.

These stickers are also very suitable for labeling convex surfaces and have a high adhesive
strength.

You can apply these stickers with the "Dry" or "Wet" method.


Dry method: (Recomended)
-Apply decal at room temperature
-Clean & dry the surface
-Remove the excess foil from the delivered sticker
-"Remove" the pre-cut decal from the decal sheet and place it on your model
-Press the sticker firmly to activate the pressure sensitive adhesive;
This is fully cured after 48 hours

Wet Method:
-Apply to model at room temperature
-Clean & dry the surface
-Mix 1 drop of soap with lime-free water (boiled or distilled) in a container
or plant sprayer
-Remove the excess foil from the supplied sticker sheet
-Spray the surface to be stickered with the plant sprayer
-"Remove" the pre-cut sticker from the sticker sheet and place
your decal on your model
or
-Put your sticker through the water/soap tray and place your sticker on your model
- Correct the position if necessary: ​​these stickers are perfect for that
- Rub the water under the sticker from the center to the outside of the sticker
-Press the sticker firmly to activate the pressure sensitive adhesive;
This is fully cured after 48 hours

Professional custom pre-cut stickers.
Color fade and water resistant for years.

 

Dit vind je misschien ook leuk